Today I played with LegoMindstorms. I programmed a part for a lego machine and the EV3 made it work! The EV3 is a lego machine with plugs and a USB cable. You have to use a software on a computer to program it though. The programming is pretty easy :D . When your done learning how to program, there is a button on the bottom right corner that says when you hover your mouse over it, it says download. Before you press that make sure that a PC cable is plugged into a USB Cable on the fat end and on the short end, plug the cord into the EV3 part that says PC.
Then you pressed download after you save as on the save button. Name it whatever you want and then press download. The EV3 will make a noise and that shows it downloaded. Now on the EV3, press the right arrow and it will go to the folder area.
Now look for the folder you saved onto the EV3 and select it. Then there should be the play symbol next to the word Program. Hit that and your EV3 will to whatever you programmed it to do!
And that is how you make the EV3 work!
:D Jack
No comments:
Post a Comment